# text: "An unknown tablet driver was detected on your system. It is not possible to have more than one tablet driver installed due to software conflicts."
# item 2: TEXT (0x88) disabled
# bounds: x1=12 y1=74 x2=341 y2=138
# text: "Please remove any old Wacom drivers by removing all Wacom files, or remove any tablet drivers from other tablet manufacturers. Then restart your computer."
DITL_102.txt
# 8 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=297 y1=159 x2=365 y2=179
# text: "Serial"
# item 1: BUTTON (0x04) enabled
# bounds: x1=151 y1=270 x2=231 y2=290
# text: "USB"
# item 2: BUTTON (0x04) enabled
# bounds: x1=156 y1=158 x2=236 y2=178
# text: "ADB"
# item 3: BUTTON (0x04) enabled
# bounds: x1=14 y1=160 x2=94 y2=179
# text: "Quit"
# item 4: TEXT (0x88) disabled
# bounds: x1=16 y1=12 x2=385 y2=96
# text: "To find the tablet, I need to know where to look.\nWhat type of interface does your tablet have?\nIf you do not know what port the tablet is connected to, please inspect the port or refer to your system hardware manual."
# item 5: PICTURE (0x40) enabled
# bounds: x1=182 y1=110 x2=215 y2=142
# PICT resource ID: 129
# item 6: PICTURE (0x40) enabled
# bounds: x1=171 y1=222 x2=203 y2=254
# PICT resource ID: 128
# item 7: PICTURE (0x40) enabled
# bounds: x1=273 y1=111 x2=375 y2=143
# PICT resource ID: 130
DITL_103.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=136 y1=115 x2=336 y2=135
# text: "LED On"
# item 1: BUTTON (0x04) enabled
# bounds: x1=24 y1=99 x2=104 y2=119
# text: "Quit"
# item 2: BUTTON (0x04) enabled
# bounds: x1=136 y1=85 x2=336 y2=105
# text: "LED Off"
# item 3: TEXT (0x88) disabled
# bounds: x1=12 y1=8 x2=337 y2=72
# text: "An ADB Tablet was not detected by the system.\nCheck the status LED on the upper edge of the tablet. Is it on or off?"
DITL_104.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=271 y1=86 x2=339 y2=106
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=12 y1=12 x2=339 y2=76
# text: "There may be a problem with your tablet. Contact Wacom technical support for help with troubleshooting. Refer to the Read Me file for contact information."
DITL_105.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=293 y1=135 x2=373 y2=155
# text: "Quit"
# item 1: TEXT (0x88) disabled
# bounds: x1=12 y1=8 x2=374 y2=40
# text: "There is probably a problem with your connection."
# item 2: TEXT (0x88) disabled
# bounds: x1=12 y1=106 x2=373 y2=122
# text: "Then restart your computer and re-run the installer."
# item 3: TEXT (0x88) disabled
# bounds: x1=12 y1=41 x2=374 y2=105
# text: "Shut down your computer and make sure the tablet’s ADB connector is attached to an active ADB port, such as the one on the back of your computer. "
DITL_106.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=136 y1=113 x2=336 y2=133
# text: "LED On"
# item 1: BUTTON (0x04) enabled
# bounds: x1=22 y1=98 x2=102 y2=118
# text: "Quit"
# item 2: BUTTON (0x04) enabled
# bounds: x1=136 y1=83 x2=336 y2=103
# text: "LED Off"
# item 3: TEXT (0x88) disabled
# bounds: x1=16 y1=8 x2=341 y2=72
# text: "A USB Tablet was not detected by the system.\nCheck the status LED on the upper edge of the tablet. Is it on or off?"
DITL_107.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=277 y1=124 x2=357 y2=144
# text: "Quit"
# item 1: TEXT (0x88) disabled
# bounds: x1=12 y1=8 x2=358 y2=72
# text: "Your tablet must be connected to your computer or a USB hub. Please check all USB connections between your tablet and computer system."
# item 2: TEXT (0x88) disabled
# bounds: x1=12 y1=72 x2=358 y2=104
# text: "If you have a USB hub, check those connections as well."
DITL_108.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=293 y1=86 x2=373 y2=106
# text: "Quit"
# item 1: TEXT (0x88) disabled
# bounds: x1=12 y1=8 x2=374 y2=72
# text: "There may be a problem with your tablet connection. Make sure that the tablet connector is attached to an active USB port for your system."
DITL_109.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=264 y1=70 x2=344 y2=90
# text: "Quit"
# item 1: TEXT (0x88) disabled
# bounds: x1=12 y1=8 x2=343 y2=56
# text: "All serial ports are in use. Either replace an existing serial device with the tablet, or add an additional serial expansion card."
DITL_110.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=283 y1=138 x2=458 y2=158
# text: "Select Connection"
# item 1: BUTTON (0x04) enabled
# bounds: x1=12 y1=138 x2=92 y2=158
# text: "Quit"
# item 2: BUTTON (0x04) enabled
# bounds: x1=99 y1=138 x2=269 y2=158
# text: "Search For Tablet"
# item 3: TEXT (0x88) disabled
# bounds: x1=30 y1=11 x2=445 y2=59
# text: "I can search available ports for a tablet, or you can select which port the tablet is attached to.\n"
# item 4: TEXT (0x88) disabled
# bounds: x1=30 y1=60 x2=445 y2=124
# text: "Searching requires that commands be sent out of the serial ports to identify a tablet. These commands can have adverse effects on some peripherals."
DITL_111.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=275 y1=182 x2=375 y2=202
# text: "Continue…"
# item 1: BUTTON (0x04) enabled
# bounds: x1=171 y1=182 x2=251 y2=202
# text: "Quit"
# item 2: TEXT (0x88) disabled
# bounds: x1=8 y1=8 x2=387 y2=71
# text: "Identify the port your tablet is attached to by selecting from the list below.\nPorts in use are not available for selection and are shown dimmed."
# item 3: CUSTOM (0x00) enabled
# bounds: x1=22 y1=88 x2=378 y2=172
# data: ""
DITL_112.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=211 y1=58 x2=351 y2=78
# text: "Try Again"
# item 1: BUTTON (0x04) enabled
# bounds: x1=6 y1=58 x2=86 y2=78
# text: "Quit"
# item 2: BUTTON (0x04) enabled
# bounds: x1=95 y1=58 x2=195 y2=78
# text: "Diagnose"
# item 3: TEXT (0x88) disabled
# bounds: x1=16 y1=8 x2=348 y2=47
# text: "The tablet was not found. Would you like to:"
DITL_113.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=140 y1=96 x2=340 y2=116
# text: "LED Off"
# item 1: BUTTON (0x04) enabled
# bounds: x1=140 y1=65 x2=340 y2=85
# text: "LED On"
# item 2: BUTTON (0x04) enabled
# bounds: x1=23 y1=78 x2=103 y2=98
# text: "Quit"
# item 3: TEXT (0x88) disabled
# bounds: x1=8 y1=8 x2=340 y2=56
# text: "Check the status LED on the upper edge of the tablet. Is it on or off?"
DITL_114.txt
# 7 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=211 y1=236 x2=341 y2=256
# text: "Try Again"
# item 1: BUTTON (0x04) enabled
# bounds: x1=125 y1=236 x2=195 y2=256
# text: "Quit"
# item 2: TEXT (0x88) disabled
# bounds: x1=12 y1=6 x2=339 y2=41
# text: "There may be a problem with your power connection."
# item 3: TEXT (0x88) disabled
# bounds: x1=12 y1=105 x2=339 y2=155
# text: "If the LED comes on after checking your connections click Try Again."
# item 4: TEXT (0x88) disabled
# bounds: x1=12 y1=155 x2=339 y2=219
# text: "If the LED remains off, contact Wacom technical support for help with troubleshooting. Refer to the Read Me file for contact information."
# item 5: TEXT (0x88) disabled
# bounds: x1=12 y1=73 x2=339 y2=105
# text: "Be sure the tablet cable is firmly attached and plugged into a live outlet."
# item 6: TEXT (0x88) disabled
# bounds: x1=12 y1=41 x2=339 y2=73
# text: "If you have a tablet with a power switch make sure it is on."
DITL_115.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=210 y1=220 x2=340 y2=240
# text: "Try Again"
# item 1: BUTTON (0x04) enabled
# bounds: x1=109 y1=220 x2=189 y2=240
# text: "Quit"
# item 2: TEXT (0x88) disabled
# bounds: x1=12 y1=8 x2=340 y2=56
# text: "There may be a problem with the connection to your serial port. "
# item 3: TEXT (0x88) disabled
# bounds: x1=12 y1=56 x2=338 y2=102
# text: "Make sure the tablet cable is properly attached to an active serial port on your system."
# item 4: TEXT (0x88) disabled
# bounds: x1=12 y1=102 x2=339 y2=166
# text: "If you have an internal modem, your computer dealer may have disabled an external serial port to install the modem."
# item 5: TEXT (0x88) disabled
# bounds: x1=12 y1=166 x2=339 y2=201
# text: "After checking your connections click Try Again."
DITL_116.txt
# 1 entries
# item 0: TEXT (0x88) disabled
# bounds: x1=12 y1=12 x2=341 y2=64
# text: "One moment please:\nSearching Serial ports for a tablet.\nNow searching: ^0"
DITL_117_Old iMac Software.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=340 y1=265 x2=398 y2=285
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=17 y1=15 x2=397 y2=31
# text: "Warning: Software installation could not be completed."
# item 2: TEXT (0x88) disabled
# bounds: x1=16 y1=41 x2=396 y2=89
# text: "To install the USB tablet software, your iMac must be running Mac OS 8.5 or greater and you must install the iMac Firmware Update and the iMac Update 1.1 software."
# item 3: TEXT (0x88) disabled
# bounds: x1=15 y1=96 x2=395 y2=144
# text: "Your tablet will function in mouse emulation mode. However, complete tablet functionality including pressure will not be available until the tablet software is installed."
# item 4: TEXT (0x88) disabled
# bounds: x1=15 y1=152 x2=395 y2=248
# text: "To install the iMac software updates:\n• Go to the Apple iMac Updates folder located on the tablet\'s CD ROM.\n• Expand the iMac Firmware Update.smi and iMac Update 1.1.smi files to your desktop and launch the software updates."
DITL_300.txt
# 46 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=310 y1=299 x2=400 y2=319
# text: "Install"
# item 1: BUTTON (0x04) enabled
# bounds: x1=284 y1=16 x2=400 y2=36
# text: "Remove"
# item 2: BUTTON (0x04) enabled
# bounds: x1=310 y1=264 x2=400 y2=284
# text: "Quit"
# item 3: BUTTON (0x04) enabled
# bounds: x1=190 y1=299 x2=290 y2=319
# text: "Drive"
# item 4: BUTTON (0x04) enabled
# bounds: x1=190 y1=264 x2=290 y2=284
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=611 y1=333 x2=681 y2=353
# text: "Standard"
# item 6: BUTTON (0x04) enabled
# bounds: x1=15 y1=16 x2=221 y2=36
# text: "Custom Install"
# item 7: BUTTON (0x04) enabled
# bounds: x1=571 y1=218 x2=671 y2=238
# text: "Easy Install"
# item 8: BUTTON (0x04) enabled
# bounds: x1=524 y1=357 x2=604 y2=377
# text: "Save Text"
# item 9: CUSTOM (0x80) disabled
# bounds: x1=15 y1=48 x2=400 y2=236
# data: ""
# item 10: CUSTOM (0x80) disabled
# bounds: x1=16 y1=261 x2=181 y2=325
# data: ""
# item 11: CUSTOM (0x80) disabled
# bounds: x1=82 y1=270 x2=114 y2=302
# data: ""
# item 12: CUSTOM (0x80) disabled
# bounds: x1=24 y1=305 x2=173 y2=314
# data: ""
# item 13: CUSTOM (0x80) disabled
# bounds: x1=24 y1=270 x2=72 y2=279
# data: ""
# item 14: CUSTOM (0x80) disabled
# bounds: x1=29 y1=362 x2=178 y2=371
# data: ""
# item 15: CUSTOM (0x80) disabled
# bounds: x1=28 y1=377 x2=177 y2=386
# data: ""
# item 16: CUSTOM (0x80) disabled
# bounds: x1=24 y1=274 x2=173 y2=296
# data: ""
# item 17: CUSTOM (0x80) disabled
# bounds: x1=187 y1=365 x2=336 y2=392
# data: ""
# item 18: CHECKBOX (0x05) enabled
# bounds: x1=520 y1=10 x2=550 y2=26
# text: "A"
# item 19: CHECKBOX (0x05) enabled
# bounds: x1=520 y1=26 x2=550 y2=42
# text: "B"
# item 20: CHECKBOX (0x05) enabled
# bounds: x1=520 y1=42 x2=550 y2=58
# text: "C"
# item 21: CHECKBOX (0x05) enabled
# bounds: x1=520 y1=58 x2=550 y2=74
# text: "D"
# item 22: CHECKBOX (0x05) enabled
# bounds: x1=520 y1=74 x2=550 y2=90
# text: "E"
# item 23: CHECKBOX (0x05) enabled
# bounds: x1=520 y1=90 x2=550 y2=106
# text: "F"
# item 24: CHECKBOX (0x05) enabled
# bounds: x1=520 y1=106 x2=550 y2=122
# text: "G"
# item 25: CHECKBOX (0x05) enabled
# bounds: x1=520 y1=122 x2=550 y2=138
# text: "H"
# item 26: CHECKBOX (0x05) enabled
# bounds: x1=520 y1=138 x2=550 y2=154
# text: "I"
# item 27: CHECKBOX (0x05) enabled
# bounds: x1=520 y1=154 x2=550 y2=170
# text: "J"
# item 28: CHECKBOX (0x05) enabled
# bounds: x1=520 y1=170 x2=550 y2=186
# text: "K"
# item 29: CHECKBOX (0x05) enabled
# bounds: x1=520 y1=186 x2=550 y2=202
# text: "L"
# item 30: CHECKBOX (0x05) enabled
# bounds: x1=520 y1=202 x2=550 y2=218
# text: "M"
# item 31: CHECKBOX (0x05) enabled
# bounds: x1=520 y1=218 x2=550 y2=234
# text: "N"
# item 32: CHECKBOX (0x05) enabled
# bounds: x1=520 y1=234 x2=550 y2=250
# text: "O"
# item 33: CHECKBOX (0x05) enabled
# bounds: x1=520 y1=250 x2=550 y2=266
# text: "P"
# item 34: RADIO_BUTTON (0x06) enabled
# bounds: x1=556 y1=10 x2=586 y2=26
# text: "Q"
# item 35: RADIO_BUTTON (0x06) enabled
# bounds: x1=556 y1=26 x2=586 y2=42
# text: "R"
# item 36: RADIO_BUTTON (0x06) enabled
# bounds: x1=556 y1=42 x2=586 y2=58
# text: "S"
# item 37: RADIO_BUTTON (0x06) enabled
# bounds: x1=556 y1=58 x2=586 y2=74
# text: "T"
# item 38: RADIO_BUTTON (0x06) enabled
# bounds: x1=556 y1=74 x2=586 y2=90
# text: "U"
# item 39: RADIO_BUTTON (0x06) enabled
# bounds: x1=556 y1=106 x2=586 y2=122
# text: "V"
# item 40: RADIO_BUTTON (0x06) enabled
# bounds: x1=556 y1=122 x2=586 y2=138
# text: "W"
# item 41: RADIO_BUTTON (0x06) enabled
# bounds: x1=556 y1=138 x2=586 y2=154
# text: "X"
# item 42: RADIO_BUTTON (0x06) enabled
# bounds: x1=556 y1=154 x2=586 y2=170
# text: "Y"
# item 43: RADIO_BUTTON (0x06) enabled
# bounds: x1=556 y1=170 x2=586 y2=186
# text: "Z"
# item 44: CUSTOM (0x80) disabled
# bounds: x1=520 y1=298 x2=586 y2=346
# data: ""
# item 45: CUSTOM (0x80) disabled
# bounds: x1=523 y1=272 x2=590 y2=291
# data: ""
DITL_301.txt
# 46 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=310 y1=299 x2=400 y2=319
# text: "Install"
# item 1: BUTTON (0x04) enabled
# bounds: x1=284 y1=16 x2=400 y2=36
# text: "Remove"
# item 2: BUTTON (0x04) enabled
# bounds: x1=310 y1=264 x2=400 y2=284
# text: "Quit"
# item 3: BUTTON (0x04) enabled
# bounds: x1=190 y1=299 x2=290 y2=319
# text: "Drive"
# item 4: BUTTON (0x04) enabled
# bounds: x1=190 y1=264 x2=290 y2=284
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=607 y1=378 x2=677 y2=398
# text: "Standard"
# item 6: BUTTON (0x04) enabled
# bounds: x1=556 y1=415 x2=626 y2=435
# text: "Switch"
# item 7: BUTTON (0x04) enabled
# bounds: x1=15 y1=16 x2=205 y2=36
# text: "Easy Install"
# item 8: BUTTON (0x04) enabled
# bounds: x1=609 y1=282 x2=689 y2=302
# text: "Save Text"
# item 9: CUSTOM (0x80) disabled
# bounds: x1=615 y1=306 x2=667 y2=342
# data: ""
# item 10: CUSTOM (0x80) disabled
# bounds: x1=14 y1=240 x2=181 y2=344
# data: ""
# item 11: CUSTOM (0x80) disabled
# bounds: x1=80 y1=274 x2=112 y2=306
# data: ""
# item 12: CUSTOM (0x80) disabled
# bounds: x1=22 y1=309 x2=171 y2=318
# data: ""
# item 13: CUSTOM (0x80) disabled
# bounds: x1=22 y1=274 x2=70 y2=283
# data: ""
# item 14: CUSTOM (0x80) disabled
# bounds: x1=23 y1=257 x2=172 y2=266
# data: ""
# item 15: CUSTOM (0x80) disabled
# bounds: x1=23 y1=245 x2=172 y2=254
# data: ""
# item 16: CUSTOM (0x80) disabled
# bounds: x1=22 y1=278 x2=171 y2=300
# data: ""
# item 17: CUSTOM (0x80) disabled
# bounds: x1=22 y1=312 x2=171 y2=339
# data: ""
# item 18: CHECKBOX (0x05) enabled
# bounds: x1=657 y1=6 x2=687 y2=22
# text: "A"
# item 19: CHECKBOX (0x05) enabled
# bounds: x1=657 y1=22 x2=687 y2=38
# text: "B"
# item 20: CHECKBOX (0x05) enabled
# bounds: x1=657 y1=38 x2=687 y2=54
# text: "C"
# item 21: CHECKBOX (0x05) enabled
# bounds: x1=657 y1=54 x2=687 y2=70
# text: "D"
# item 22: CHECKBOX (0x05) enabled
# bounds: x1=657 y1=70 x2=687 y2=86
# text: "E"
# item 23: CHECKBOX (0x05) enabled
# bounds: x1=657 y1=86 x2=687 y2=102
# text: "F"
# item 24: CHECKBOX (0x05) enabled
# bounds: x1=657 y1=102 x2=687 y2=118
# text: "G"
# item 25: CHECKBOX (0x05) enabled
# bounds: x1=657 y1=118 x2=687 y2=134
# text: "H"
# item 26: CHECKBOX (0x05) enabled
# bounds: x1=657 y1=134 x2=687 y2=150
# text: "I"
# item 27: CHECKBOX (0x05) enabled
# bounds: x1=657 y1=150 x2=687 y2=166
# text: "J"
# item 28: CHECKBOX (0x05) enabled
# bounds: x1=657 y1=166 x2=687 y2=182
# text: "K"
# item 29: CHECKBOX (0x05) enabled
# bounds: x1=657 y1=182 x2=687 y2=198
# text: "L"
# item 30: CHECKBOX (0x05) enabled
# bounds: x1=657 y1=198 x2=687 y2=214
# text: "M"
# item 31: CHECKBOX (0x05) enabled
# bounds: x1=657 y1=214 x2=687 y2=230
# text: "N"
# item 32: CHECKBOX (0x05) enabled
# bounds: x1=657 y1=230 x2=687 y2=246
# text: "O"
# item 33: CHECKBOX (0x05) enabled
# bounds: x1=657 y1=246 x2=687 y2=262
# text: "P"
# item 34: RADIO_BUTTON (0x06) enabled
# bounds: x1=693 y1=6 x2=723 y2=22
# text: "Q"
# item 35: RADIO_BUTTON (0x06) enabled
# bounds: x1=693 y1=22 x2=723 y2=38
# text: "R"
# item 36: RADIO_BUTTON (0x06) enabled
# bounds: x1=693 y1=38 x2=723 y2=54
# text: "S"
# item 37: RADIO_BUTTON (0x06) enabled
# bounds: x1=693 y1=54 x2=723 y2=70
# text: "T"
# item 38: RADIO_BUTTON (0x06) enabled
# bounds: x1=693 y1=70 x2=723 y2=86
# text: "U"
# item 39: RADIO_BUTTON (0x06) enabled
# bounds: x1=693 y1=102 x2=723 y2=118
# text: "V"
# item 40: RADIO_BUTTON (0x06) enabled
# bounds: x1=693 y1=118 x2=723 y2=134
# text: "W"
# item 41: RADIO_BUTTON (0x06) enabled
# bounds: x1=693 y1=134 x2=723 y2=150
# text: "X"
# item 42: RADIO_BUTTON (0x06) enabled
# bounds: x1=693 y1=150 x2=723 y2=166
# text: "Y"
# item 43: RADIO_BUTTON (0x06) enabled
# bounds: x1=693 y1=166 x2=723 y2=182
# text: "Z"
# item 44: CUSTOM (0x80) disabled
# bounds: x1=15 y1=48 x2=400 y2=236
# data: ""
# item 45: CUSTOM (0x80) disabled
# bounds: x1=616 y1=343 x2=673 y2=374
# data: ""
DITL_500_Legal DITL.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=387 y1=298 x2=461 y2=318
# text: "Agree"
# item 1: BUTTON (0x04) enabled
# bounds: x1=301 y1=298 x2=375 y2=318
# text: "Disagree"
# item 2: BUTTON (0x04) enabled
# bounds: x1=214 y1=298 x2=288 y2=318
# text: "Print"
# item 3: BUTTON (0x04) enabled
# bounds: x1=122 y1=298 x2=196 y2=318
# text: "Save..."
# item 4: CUSTOM (0x00) enabled
# bounds: x1=12 y1=45 x2=463 y2=288
# data: ""
# item 5: TEXT (0x88) disabled
# bounds: x1=12 y1=8 x2=463 y2=44
# text: "If you agree with the terms of this license, press \"Agree\" to install the software. If you do not agree, press \"Disagree\"."
DITL_501_ReadMe DITL.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=358 y1=266 x2=452 y2=286
# text: "Continue…"
# item 1: BUTTON (0x04) enabled
# bounds: x1=192 y1=266 x2=272 y2=286
# text: "Quit"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=11 y1=13 x2=454 y2=255
# data: ""
DITL_502_Cancel Print DLOG.txt
# 2 entries
# item 0: TEXT (0x88) disabled
# bounds: x1=4 y1=6 x2=220 y2=38
# text: "To cancel printing hold down the ‚åò key and type a period(.)."
# item 1: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 0001F053
DITL_1002.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=200 y1=60 x2=270 y2=80
# text: "Stop"
# item 1: BUTTON (0x04) enabled
# bounds: x1=310 y1=60 x2=380 y2=80
# text: "X"
# item 2: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=270 y2=58
# text: "Please insert the disk:\n^0"
# item 3: ICON (0xA0) disabled
# bounds: x1=20 y1=10 x2=52 y2=42
# ICON resource ID: 1000
DITL_1003.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=270 y1=126 x2=340 y2=146
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=187 y1=126 x2=257 y2=146
# text: "Stop"
# item 2: RADIO_BUTTON (0x06) enabled
# bounds: x1=30 y1=50 x2=268 y2=66
# text: "Install for Power Macintosh only"
# item 3: RADIO_BUTTON (0x06) enabled
# bounds: x1=30 y1=74 x2=270 y2=90
# text: "Install for 680x0 Macintosh only"
# item 4: RADIO_BUTTON (0x06) enabled
# bounds: x1=30 y1=98 x2=297 y2=114
# text: "Install for any Macintosh (fat binary)"
# item 5: TEXT (0x88) disabled
# bounds: x1=10 y1=10 x2=340 y2=42
# text: "You can save disk space by installing applications which are optimized for one type of Macintosh."
DITL_1004.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=250 y1=54 x2=320 y2=74
# text: "Restart"
# item 1: BUTTON (0x04) enabled
# bounds: x1=167 y1=54 x2=237 y2=74
# text: "Quit"
# item 2: ICON (0xA0) disabled
# bounds: x1=20 y1=10 x2=52 y2=42
# ICON resource ID: 1
# item 3: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=320 y2=42
# text: "Please restart your Macintosh before using any of the installed items."
DITL_1101.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=200 y1=54 x2=270 y2=74
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=270 y2=42
# text: "There is not enough memory available to run the installer."
DITL_1102.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=250 y1=102 x2=320 y2=122
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=320 y2=90
# text: "An unexpected error has occurred.\n\nThere may be some software conflict with your system or the installer file might be damaged."
DITL_1103.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=135 y1=54 x2=205 y2=74
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=205 y2=42
# text: "An internal installer error has occurred."
DITL_1104.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=260 y1=54 x2=330 y2=74
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=330 y2=42
# text: "The installer requires System 4.2 or newer and a Macintosh Plus or newer."
DITL_1111.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=215 y1=102 x2=285 y2=122
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=285 y2=90
# text: "An error occurred while reading “^0”.\n\nThe installer files are damaged."
DITL_1113.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=280 y1=86 x2=350 y2=106
# text: "Stop"
# item 1: BUTTON (0x04) enabled
# bounds: x1=197 y1=86 x2=267 y2=106
# text: "Skip"
# item 2: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=350 y2=74
# text: "“^0” could not be installed.\n\nThe installer files are damaged."
DITL_1115.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=215 y1=70 x2=285 y2=90
# text: "Stop"
# item 1: BUTTON (0x04) enabled
# bounds: x1=132 y1=70 x2=202 y2=90
# text: "Skip"
# item 2: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=285 y2=58
# text: "“^0” is locked and cannot be modified."
DITL_1116.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=230 y1=70 x2=300 y2=90
# text: "Stop"
# item 1: BUTTON (0x04) enabled
# bounds: x1=147 y1=70 x2=217 y2=90
# text: "Skip"
# item 2: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=300 y2=58
# text: "“^0” is busy or in use by another application."
DITL_1117.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=250 y1=70 x2=320 y2=90
# text: "Stop"
# item 1: BUTTON (0x04) enabled
# bounds: x1=167 y1=70 x2=237 y2=90
# text: "Skip"
# item 2: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=320 y2=58
# text: "A disk error occurred while accessing “^0”."
DITL_1118.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=280 y1=86 x2=350 y2=106
# text: "Stop"
# item 1: BUTTON (0x04) enabled
# bounds: x1=197 y1=86 x2=267 y2=106
# text: "Skip"
# item 2: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=350 y2=74
# text: "This volume is full.\n\n“^0” could not be installed."
DITL_1119.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=315 y1=102 x2=385 y2=122
# text: "Stop"
# item 1: BUTTON (0x04) enabled
# bounds: x1=232 y1=102 x2=302 y2=122
# text: "Skip"
# item 2: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=385 y2=90
# text: "Unable to access “^0”.\n\nYou don’t have the required access permission."
DITL_1120.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=300 y1=70 x2=370 y2=90
# text: "Stop"
# item 1: BUTTON (0x04) enabled
# bounds: x1=217 y1=70 x2=287 y2=90
# text: "Skip"
# item 2: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=370 y2=58
# text: "A file error (^1) occurred while accessing “^0”."
DITL_1131.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=180 y1=86 x2=250 y2=106
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=250 y2=74
# text: "This is an MFS volume.\n\nThe installer cannot install files on MFS volumes."
DITL_1132.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=240 y1=54 x2=310 y2=74
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=310 y2=42
# text: "There is not enough space available on this volume to install the files."
DITL_1133.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=240 y1=70 x2=310 y2=90
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=310 y2=58
# text: "There is not enough space available on the startup (system) volume to install the necessary files."
DITL_1141.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=295 y1=148 x2=365 y2=168
# text: "Stop"
# item 1: BUTTON (0x04) enabled
# bounds: x1=295 y1=118 x2=365 y2=138
# text: "Skip"
# item 2: BUTTON (0x04) enabled
# bounds: x1=70 y1=118 x2=240 y2=138
# text: "Replace This Item"
# item 3: BUTTON (0x04) enabled
# bounds: x1=70 y1=148 x2=240 y2=168
# text: "Replace ALL Duplicates"
# item 4: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=365 y2=106
# text: "^1 item named “^0” already exists.\n\nDo you wish to replace it with the item from the installer?"
DITL_1142.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=270 y1=118 x2=340 y2=138
# text: "Stop"
# item 1: BUTTON (0x04) enabled
# bounds: x1=187 y1=118 x2=257 y2=138
# text: "Skip"
# item 2: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=340 y2=106
# text: "The FILE “^0” cannot be installed.\n\nA FOLDER with that name already exists (you can’t replace a FOLDER with a FILE)."
DITL_1151.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=200 y1=54 x2=270 y2=74
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=270 y2=42
# text: "Please open the installer application to install this file."
DITL_1152.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=195 y1=102 x2=265 y2=122
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=265 y2=90
# text: "A temporary file could not be created on your startup disk.\n\nThe disk might be locked, or it might be too full."
DITL_1153.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=335 y1=86 x2=405 y2=106
# text: "Quit"
# item 1: BUTTON (0x04) enabled
# bounds: x1=252 y1=86 x2=322 y2=106
# text: "Continue"
# item 2: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=405 y2=74
# text: "^0 is done. ^1\n\nClick QUIT to leave the installer. Click CONTINUE to perform additional installations."
DITL_1154.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=210 y1=118 x2=280 y2=138
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=280 y2=106
# text: "Some fonts have been placed in a folder on your startup disk.\n\nPlease install the font files ^0."
DITL_1160.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=285 y1=54 x2=355 y2=74
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=355 y2=42
# text: "You need a Macintosh equipped with a PowerPC processor to run this application."